The new merch store is open!
DIY Active Pedals Plans released!
Stainless Steel H-Pattern released!

Sim Racing DIY PROJECTS highlights

DIY Sim Racing PEDALS

Sim Racing Pedals

  • Difficulty: 3/5
  • Assembly Time: 4h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW
  • Assembly Guide: SHOW
  • Setup Guide: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro/Leonardo + HX711
  • Manufacturing method:
    • Laser Cutting (3mm & 5mm Thickness)
    • 3D Printing
    • CNC Machining
    • Hand Cutting
  • File formats: STEP, DXF, STL, PDF
  • RELEASE DATE: MAY 2022

3D PRINTED Sim Racing Pedals

  • Difficulty: 2/5
  • Assembly Time: 4h
  • USER MANUAL: SHOW
  • Bill of Materials: SHOW
  • Screws List: SHOW
  • ASSEMBLY GUIDE: SHOW
  • Setup Guide: SHOW
  • BUILD COST Estimate: Show
  • Electronics: Arduino Micro/Leonardo + HX711
  • Manufacturing method:
    • 3D Printing
  • File formats: STL
  • Release date: MAY 2022

SteelForce Apex Pedals

  • Difficulty: 3/5
  • Assembly Time: 5h
  • USER MANUAL: SHOW
  • Bill of Materials: SHOW
  • ASSEMBLY GUIDE: SHOW
  • BUILD COST Estimate: SHOW
  • Electronics: Arduino Micro + HX711
  • Manufacturing method:
    • Laser Cutting
  • File formats: DXF, STEP, STL
  • Release date: July 2026

DIY Load Cell Pedals V2

  • Difficulty: 3/5
  • Assembly Time: 4h
  • USER MANUAL: SHOW
  • Bill of Materials: SHOW
  • ASSEMBLY GUIDE: SHOW
  • Setup Guide: SHOW
  • BUILD COST Estimate: Show
  • Electronics: Arduino Micro + HX711
  • Manufacturing method:
    • 3D Printing
    • CNC Machining
  • File formats: STEP, STL, DXF
  • Release date: February 2026

3D Printed DIY Load Cell Pedals V2

  • Difficulty: 3/5
  • Assembly Time: 4h
  • User Manual: SHOW
  • Bill of Materials: SHOW
  • ASSEMBLY GUIDE: SHOW
  • SETUP GUIDE: SHOW
  • BUILD COST Estimate: SHOW
  • Electronics: Arduino Micro + HX711
  • Manufacturing method:
    • 3D Printing
  • File formats: STL
  • Release date: October 2026

ACTIVE DIY Pedals

  • Difficulty: 5/5
  • Assembly Time: 10h
  • USER MANUAL: SHOW
  • Bill of Materials: SHOW
  • ASSEMBLY GUIDE: SHOW
  • Manufacturing method:
    • Laser Cutting
  • File formats: DXF, STEP, STL
  • Release date: July 2026

DIY Inverted Pedals

  • Difficulty: 4/5
  • Assembly Time: 6h
  • USER MANUAL: SHOW
  • Bill of Materials: SHOW
  • ASSEMBLY GUIDE: SHOW
  • BUILD COST Estimate: SHOW
  • Electronics: Arduino Micro + HX711
  • Manufacturing method:
    • Laser Cutting
  • File formats: DXF, STEP, STL
  • Release date: August 2026

3D Printed Simcade Pedals

  • Difficulty: 1/5
  • Assembly Time: 3h
  • User MANUAL: SHOW
  • Bill of Materials: SHOW
  • ASSEMBLY GUIDE: SHOW
  • SETUP GUIDE: SHOW
  • BUILD COST Estimate: SHOW
  • Electronics: Arduino Micro
  • Manufacturing method:
    • 3D Printing
  • File formats: STL
  • Release date: October 2026

DIY Sim Racing Shifters

DIY 3D PRINTED H-SHIFTER

  • Difficulty: 2/5
  • Assembly Time: 2h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW
  • Assembly Guide: SHOW
  • Setup Guide: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro
  • Manufacturing method:
    • 3D Printing
  • File formats: STL, STEP
  • RELEASE DATE: August 2023

METALCORE H-PATTERN SHIFTER

  • Difficulty: 4/5
  • Assembly Time: 6h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Assembly Guide: SHOW
  • Setup Guide: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro
  • Manufacturing method:
    • Laser Cutting
    • 3D Printing
  • File formats: DXF, STL, STEP
  • RELEASE DATE: July 2026

DIY SEQUENTIAL SHIFTER

  • Difficulty: 2/5
  • Assembly Time: 3h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW 
  • Assembly Guide: SHOW
  • Setup Guide: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro
  • Manufacturing method:
    • Laser Cutting
    • 3D Printing
    • Hand Cutting
    • CNC Machining
  • File formats: DXF, STL, STEP, PDF
  • RELEASE DATE: June 2023

DIY Sim Racing Cockpits

DIY Wood Sim Rig

  • Difficulty: 3/5
  • Assembly Time: 5h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW 
  • Assembly Guide: SHOW
  • Setup Guide: SHOW
  • Build Cost Estimate: SHOW
  • Manufacturing method:
    • Hand  Cutting
    • CNC Machining
  • File formats: STEP, PDF
  • RELEASE DATE: February 2026

Complete DIY Wood Sim Rig

  • Difficulty: 3/5
  • Assembly Time: 7h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW 
  • Assembly Guide: SHOW
  • Setup Guide: SHOW
  • Build Cost Estimate: SHOW
  • Manufacturing method:
    • Hand  Cutting
    • CNC Machining
  • File formats: STEP, PDF
  • RELEASE DATE: February 2026

RigForce EVO 01 – DIY Aluminum Sim Rig Plan

  • Difficulty: 3/5
  • Assembly Time: 10h
  • Full User Manual: SHOW
  • Manufacturing method:
    • Hand Cutting
    • CNC Machining
    • Laser Cutting
    • 3D Printing
  • File formats: STEP, DXF, STL, PDF
  • RELEASE DATE: August 2026

DIY Sim Racing Steering wheels

DIY Audi DTM Steering Wheel

  • Difficulty: 2/5
  • Assembly Time: 3h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW
  • Assembly Guide: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro / Zero Delay
  • Manufacturing method:
    • 3D Printing
    • CNC Machining
    • Laser Cutting
    • Handcutting
  • File formats: STL, STEP, DXF, PDF
  • RELEASE DATE: June 2025

DIY Mercedes AMG GT3 Steering Wheel

  • Difficulty: 2/5
  • Assembly Time: 3h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW
  • Assembly Guide: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro / Zero Delay
  • Manufacturing method:
    • 3D Printing
    • CNC Machining
    • Laser Cutting
    • Handcutting
  • File formats: STL, STEP, DXF, PDF
  • RELEASE DATE: June 2025

DIY Aston Martin Steering Wheel

  • Difficulty: 2/5
  • Assembly Time: 3h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW
  • Assembly Guide: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro / Zero Delay
  • Manufacturing method:
    • 3D Printing
    • CNC Machining
    • Laser Cutting
    • Handcutting
  • File formats: STL, STEP, DXF, PDF
  • RELEASE DATE: June 2025

DIY BMW DTM Steering Wheel

  • Difficulty: 2/5
  • Assembly Time: 3h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro / Zero Delay
  • Manufacturing method:
    • 3D Printing
    • CNC Machining
    • Laser Cutting
    • Handcutting
  • File formats: STL, STEP, DXF, PDF
  • RELEASE DATE: June 2025

DIY Porsche 911 GT3 Button Plate

  • Difficulty: 2/5
  • Assembly Time: 3h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro / Zero Delay
  • Manufacturing method:
    • 3D Printing
    • CNC Machining
    • Laser Cutting
    • Handcutting
  • File formats: STL, STEP, DXF, PDF
  • RELEASE DATE: June 2025

DIY Formula Steering Wheel

  • Difficulty: 2/5
  • Assembly Time: 3h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro / Zero Delay
  • Manufacturing method:
    • 3D Printing
  • File formats: STL, STEP, DXF
  • RELEASE DATE: August 2023

DIY Button Plate

  • Difficulty: 2/5
  • Assembly Time: 3h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro / Zero Delay
  • Manufacturing method:
    • 3D Printing
  • File formats: STL, STEP, DXF
  • RELEASE DATE: September 2023

DIY Sim Racing HANDBRAKES

DIY Load Cell Handbrake V2

  • Difficulty: 3/5
  • Assembly Time: 4h
  • User Manual: SHOW
  • Bill of Materials: SHOW
  • Assembly Guide: SHOW
  • Setup Guide: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro + HX711
  • Manufacturing method:
    • 3D Printing
    • CNC Machining
  • File formats: STL, STEP, DXF
  • RELEASE DATE: July 2026

SteelForce Control Handbrake

  • Difficulty: 3/5
  • Assembly Time: 4h
  • User Manual: SHOW
  • Bill of Materials: SHOW
  • Assembly Guide: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro + HX711
  • Manufacturing method:
    • Laser Cutting (3mm & 5mm thickness)
  • File formats: DXF, STEP, STL
  • RELEASE DATE: July 2026

DIY Load Cell Handbrake V1

  • Difficulty: 3/5
  • Assembly Time: 4h
  • User Manual: SHOW
  • Bill of Materials: SHOW 
  • Screws List: SHOW 
  • Assembly Guide: SHOW
  • Build Cost Estimate: SHOW
  • Electronics: Arduino Micro + HX711
  • Manufacturing method:
    • Laser Cutting (3mm & 5mm thickness)
    • CNC Machining
    • Hand Cutting
    • 3D Printing
  • File formats: DXF, STEP, STL, PDF
  • RELEASE DATE: May 2023

Subscribe to the DIY Sim Studio Newsletter

  • Receive a 15% promo code
  • Get notified about the launch of new projects
  • Get notified about sales
  • Free Download of the Mercedes Steering Wheel DIY CAD Plans

DIY AMG GT Track Series Steering Wheel

Your personal data will be used to support your experience throughout this website and for other purposes described in our Privacy Policy.

No, thanks! don't show again
sim racing diy

Unlock All Current & Future DIY Projects. One-Time Payment. Lifetime Access.

Get Your Builder Pack

Edit Option

Shopping Cart
Your cart is currently empty!.

You may check out all the available products and buy some in the shop.

Continue Shopping
Add Order Note
Estimate Shipping