Description
Why Choose Our Ultimate DIY Wood Sim Rig
Triple Display Ecosystem
Rock-solid support for up to 3×32″ monitors. Integrated 3D-printed reinforcement brackets ensure zero-flex, while the design is optimized for standard desk-mount articulated monitor arms.
Inverted Pedal System
Includes an optional mounting plate for inverted pedals with a multi-point angle adjustment system to perfect your ergonomic trail braking.
Ultra-Wide Single Screen Mode
Need a cleaner look? The chassis natively supports Single Ultra-Wide monitors (up to 49″ 32:9) with the same rock-solid stability.
Universal Side-Mount Shifter Platform
Fully height-adjustable and ambidextrous. Mount your H-Shifter, Sequential, and Handbrake on either the left or right side (or both).
3D-Printed Accessory Kit (Included STL)
- The Utility Hook: Heavy-duty mount for headphone or spare steering wheels.
- The Cup Holder: Secure mount for mugs or bottles to keep you hydrated during endurance races.
Stealth Keyboard Tray
Located directly under the wheelbase mount for easy access. Designed for 360mm keyboards with integrated touchpads. Mounted via M6x40 steel spacers for maximum vibration resistance.
HARDWARE SCREWS
CABLE MANAGEMENT
WOODEN BRACKET
Additional components
3mm Sound-Absorbing Noise Sponge Foams (alternative link)
Place on the side of the steering wheel mount to absorb vibrations and prevent noise
3mm Sound-Absorbing Noise Sponge Foams
Place on the side of the steering wheel mount to absorb vibrations and prevent noise
FINISHING
MACHINING AND MOUNTING
Find what you need in the DIY Tools section.
GENERAL QUESTIONS
This is our most asked question! Everything you need is listed in the BOM (Bill of Materials). You can find it in two places:
Directly within the BOM section of the product page.
Inside the comprehensive Assembly PDF included with your purchase. It includes exact quantities, dimensions, and even direct sourcing links to save you time.
- You can also find many parts on our DIY Tools page.
Ease of Assembly: 5/10. If you have basic DIY skills, you can build this. The assembly is straightforward thanks to our detailed exploded views and the fact that most parts are “bolt-on.” No complex machining is required.
Yes! The pack includes a professional PDF documentation with exploded views, a full Bill of Materials (BOM) with purchase links, and technical drawings to ensure a smooth “no-headache” assembly process.
Yes! The thick plywood panels and reinforced geometry are designed to handle high-torque wheelbases. For wheels over 10Nm, we recommend using the 18mm or 20mm board thickness for maximum stiffness.
You can also add brackets under the steering wheel support.
If you have all the materials ready, the assembly takes approximately 4 to 6 hours for a hand-build, and about 2 hours if the parts are pre-cut by a CNC machine.
While not mandatory, we recommend applying at least one coat of clear varnish or floor paint. This protects the wood from sweat and humidity, ensuring your rig lasts for years.
The rig is designed to be universal. Most side-mount or bottom-mount racing seats (with standard sliders) will fit perfectly on our adjustable mounting plates.
Specifications
We highly recommend using Birch Plywood or any other high-density hardwood. Avoid low-grade construction lumber or OSB for better rigidity.
The official design is based on 18mm (3/4″) thickness. However, you can use boards ranging from 15mm to 20mm (5/8″ to 13/16″).
Note: Our hardware list is calculated for 18mm boards. If you choose a different thickness, remember to adjust your bolt lengths accordingly (+/- a few millimeters).
Performance & Comfort
To eliminate noise, use the sound-absorbing pads listed in the BOM (Bill of Materials). Place small cutouts between the wooden panels at the joint interfaces to prevent wood-on-wood contact during heavy Force Feedback.
The chassis is engineered to comfortably support drivers up to 1.95m (6’5″) tall and weighing up to 150kg (330 lbs).
The rig features a clean setup using self-adhesive plastic clips (see product photos) attached to the bottom and inner panels. This allows you to route all USB and power cables out of sight.
Assembly & Hardware
Both the seat and the pedal tray use the same interchangeable mounting plate system. They are secured using a locking pin (goupille) and tightened with an M10 clamping handle for quick and tool-less adjustments.
Yes. We strongly recommend applying a drop of wood glue or Super Glue inside the hole before screwing in the insert nuts. This fuses the metal to the wood fibers and prevents them from loosening over time due to vibrations.
Reviews
There are no reviews yet