, PDF file included)
Description
ELECTRONICS
- Quantity: 1
- Option: Micro USB
- Note: compatible only with HX711 Loadcell Amplifier
SPRINGS
HARDWARE SCREWS
FINISHING
ALTERNATIVE KNOB
ASSEMBLY AND SOLDERING
3D PRINTING
Cost estimate of the 3D Printed H Shifter
| Pieces | Cost |
|---|---|
| Screws (bolts, washers, nuts...) | $5 |
| M8 Female Rod End | $2.43 |
| Bearings | $3.69 |
| Springs | $10,50 |
| Electronics | $7 |
| 3D Printing (if you own a 3D printer) | $5 |
| DIY Sim Studio CAD Plans | $8-15 (Depending on the offer/sale/bundle) |
| TOTAL | Min: $30 - Average: $43 - Max: $60 |
DIY 3D H PATTERN SHIFTER MANUAL
- You are going to download a file (the CAD models of this H Pattern Shifter), we don’t sell physical product
- After your download, you will be able to get your file in your member area (Account > Downloads)
- This product is protected by Licence. You are not authorized to sell or share it.
3D Printed H Shifter – Parts compatibility
You can use other parts to build this H Pattern Shifter (apart from those listed in the required parts section), but you will need to check that they are compatible.LEVER SPRING
- ØInside diameter: not below 8.5mm
- ØOutside diameter: not to exceed 18mm
SIDE TENSION SPRINGS
- ØWidth: 40mm and 45mm
- ØOutside diameter: not to exceed 8m
Material of the 3d printed gear shifter
3D PRINTING
As for the Sim Racing Sequential Shifter, I recommend PLA or ABS. For the infill, I recommend a minimum of 20%. Here are recommendations for printing 3D solid parts.
Looking for high-quality 3D printing services? With Treatstock, you can easily get instant quotes from professional manufacturers worldwide. Upload your design today and get your free, no-obligation quote in minutes! 👉 Get Your Quote Now
Reviews
There are no reviews yet