Description
FEATURES
• EASY TO BUILD
This building kit has been designed to be easy to build without expensive tools or advanced knowledge! A complete tutorial is provided, the goal was to make its construction as accessible as possible to the general public. In the event of a issue, the customers will receive free assistance in the “Help & Questions” section.
• CHEAP
This Foruma One Steering Wheel can be built with a small budget ranging from 50€ and 100€, depending on the parameters you have chosen (choice of material, USB Board…) and the equipment you have (3D Printer).
• STRONG AND CUSTOMIZABLE
This steering wheel has a very strong structure, stable and smooth mechanism for the paddles shifters. You can modify the front plate as you wish (add buttons, a screen, LEDs, etc.) and cover the handles in leather or alcantara. The steering wheel can of course be covered in carbon.
Here are recommendations for printing 3D solid parts: https://3dpros.com/guides/optimizing-part-strengt
ASSEMBLY
BUYING GUIDE
• ELECTRONICS
- Arduino Pro Micro Board
- Micro USB Cable
- MicroSwitch [Option: Handle 11.5mm]
- MicroSwitch alternative link [Option: MS-1A-13.5]
- Alternative USB Board #1 [USB Arcade Encoder Zero Delay]
- Alternative USB Board #2
- Ø12mm Push Button [Option: Momentary]
- Ø12mm Push Button
- Rotary Encoders
• MAGNETS
- Ø12×5-4mm N52 Magnet [Option: 12×5-4 MM]
- Ø12×5-4mm N52 Magnet alternative link [Option: 12×5-4 MM]
• ACCESSORIES
• FINISHING
• ASSEMBLY
- 3 Hex Wrench Spanner [Quantity: 1] [Option: 3-4-5mm, 4-5-6mm]
- Allen Hex key [Quantity: 1] [Option: flat head]
- Alternative Allen Hex key
- Screw driver hand tool
- LED Flash light
- Super Glue Liquid Bottle
• SOLDERING
- Electric soldering iron
- Soldering station 1
- Soldering station 2
- Soldering wire
- Soldering dross
- Soldering tweezers
- Wire cable stripper
- Metal soldering holder
- M12x1.5 Cable gland [Option: M12x1.5 fit 3-6.5mm]
- GX12 Connector [Option: M12x1.5 fit 3-6.5mm]
• ALIEXPRESS SCREWS
- Pandametal Screws Store : most of what you need is here
• 3D PRINTER
Material of the Formula One Steering Wheel
• 3D PRINTING
I recommend PLA or ABS. For the infill, I recommend a minimum of 20%.
How to get the required materials
• 3D PRINTING
You can buy a 3D printer, or find a 3D printing service like treatstock.
• SCREWS
Bolt depot, Motedis and FixnVis.
Tolerances
3D Printing : 0.6mm
Reviews
There are no reviews yet